How to install Transmission Optware on USB Harddisk

How to install Transmission Optware on USB Harddisk

Equipment:
- Asus RT-N16 router
- 40GB usb flash disk.

1. Telnet to the router, enter login name as root and your password

2. Type mount
- it will show where is your hardisk mounted.

3. Un-mount it with umount /tmp/mnt/op

4. Type this to prepare the hardisk with folder and mounted it as /opt
mount /dev/sda1 /mnt
cd /mnt
mkdir /mnt/opt
mkdir -p /mnt/data/torrents
mount /mnt/opt /opt

5. Install transmission with this code, open port for transmission is set at 25000. your ip address:9091 to view transmission GUI.
wget http://www.3iii.dk/linux/optware/optware-install-ddwrt.sh -O /tmp/optware-install.sh
sh /tmp/optware-install.sh
/opt/bin/ipkg-opt -verbose_wget install transmission
/opt/bin/transmission-daemon -g /mnt/data/torrents/.config/transmission-daemon
killall transmission-daemon
wget http://www.3iii.dk/linux/optware/settings.json -O /mnt/data/torrents/.config/transmission-daemon/settings.json
iptables -I INPUT 1 -p tcp --dport 25000 -j ACCEPT
/opt/bin/transmission-daemon -g /mnt/data/torrents/.config/transmission-daemon
http://192.168.1.1:9091/

6. Open your TomatoUSB router, view USB Support page. Add this code for run after mounting
umount /tmp/mnt/op
mount /dev/sda1 /mnt
mount /mnt/opt /opt
/opt/bin/transmission-daemon -g /mnt/data/torrents/.config/transmission-daemon
iptables -I INPUT 1 -p tcp --dport 25000 -j ACCEPT

Add this code for run before unmounting
killall transmission-daemon
umount /opt

Now transmission is installed properly on the USB hardisk.

Good Luck,
tictac